Archive

Archive for the ‘Needlework’ Category

Changing Tides Fiber Art Shop

July 16, 2010 Leave a comment

Changing Tides in Juneau isn’t technically a hole-in-the-wall shop, since it’s on the second floor of a building full of shops. I found it via a street-level window display.

Changing Tides Street-Level Window Display

It’s also a little bigger than what I consider hole-in-the-wall. But as it caters to cross stitching and needlepoint as well as quilting, it’s plenty cramped for one.

For Quilters

Like The Quilted Raven in Anchorage, Changing Tides focuses mostly on Alaska-themed fabric prints and designs. It’s in downtown near the harbor, easily accessible to most tourists by foot.¬†There’s quite a bit of overlap with what The Quilted Raven sells, too. As the owner admitted to me in conversation towards the end of my visit, she’s well acquainted with the owner of The Quilted Raven and they have similar tastes in fabric.

One difference I noticed, though, is that Changing Tides has a pretty good selection of non-Alaska prints. The blacks and whites were especially interesting, but there were a couple of batiques that really caught my eye. I found a pink batique with a red cherries pattern that I had to adopt in addition to the white and black abstract print I had selected, even though my budget was a little tight.

Changing Tides sells scraps by the ounce. I think the prices are perhaps a little high for scraps, but they have some really good scraps. It’s a great way to get a little bit of each of a bunch of Alaska-theme prints in one spot.

Changing Tide Purchases

For Cross-Stitch and Needlepoint Folk

The store carries an array of patterns for cross-stitch and needlepoint. Some are counted, but they have a bunch of patterns printed or hand-painted directly onto canvas hanging behind the counter on the left as you walk in. The hand-painted ones include unique originals by famous Alaskan artists. You pay for it, but it’s worth it if you can afford it. The one that caught my eye was $175, but I would have been happy to pay it if I could. (Though I might’ve been afraid to actually stitch it!)

They carry embroidery thread, too, but I paid little attention to that. You can get embroidery thread anywhere. I should have checked to see if any of it was locally made, but didn’t think about it. Sorry!

For Art Collectors

Changing Tides serves as a consignment shop for local artists in the Juneau area. In addition to the works of cross-stitch and needlepoint for sale on one wall, many of the quilts on display are for sale, too. All of the consignment art is Alaska-themed. There’s a lot of good stuff; I recommend checking it out even if you don’t intend to buy.

Because of this, picture-taking isn’t really welcome in Changing Tides. Some of the artists represented don’t want their work photographed. The owner also doesn’t like having her picture taken.

In fact, I rubbed the owner the wrong way by walking in with my camera out. I assume that being in the most touristy area of Juneau involves dealing with people who just want to walk in, take pictures, and leave. The owner was short and snappy with me at first, but warmed up to me once I put my camera away (as soon as she started getting irritated with me) and started shopping.

The few pictures I did take are up on Flickr.

Advertisements

Work in Progress: Final Fantasy Tissue Box Cover

June 13, 2009 Leave a comment

In the process of working my way up in difficulty to the needlepoint projects I daydream about, I am making a tissue box cover. I’m pretty sure everyone who’s ever done plastic canvas needlepoint has done at least one of these, and by the time I finish this project I will be no exception. Mine is a simple display of characters from the original Final Fantasy for the NES. The order in which they appear on the box is semi-inspired by 8-bit Theater. I’ve got the fighter and black mage on one long side of the cover, with the white mage and monk on the other long side. The thief and the red mage each have a panel of their own. The final product will have physical and magical damage dealers alternating all the way around the box.

Clicking on any of the images will take you to a web album with more and larger pictures.

Getting Into Plastic Canvas, Part 2 – Testing Things

June 13, 2009 Leave a comment

In my previous post on plastic canvas needlepoint, I talked a bit about what it is and what people have done with it. In this post, I chronicle the embarkation of my journey toward understanding what all can be done with it, and how. Larger versions of all pictures can be found here.

How the Internets Have Failed Me

For the most part, the coolest things I’ve seen don’t seem truly inspired.¬† I don’t mean to dis them here… they’re really quite nifty. And a small percentage are downright fantastic.

But here we sit on all the possibilities of three-dimensional stitch work, and people make plain boxes. Some of the boxes are very nice. Some incorporate a little bit of extra three-dimensional-ness in the form of sewing one or more flat, decorational panels to the outside. The bulk of them are just plain ol’ squares.

So far, having been doing this for about two weeks now, I’ve mostly stuck to boxy things myself. One has to start somewhere, after all, and learning the ropes on simple shapes has proven very effective. I, however, have a couple of projects in mind which will require complex shapes and techniques to be successful. I therefore spent most of this morning trying some things out.

Whipstitching Two Pieces Together Along a Custom Curve

In addition to your basic sheets of plastic grid, here are a number of specially-shaped forms available for plastic canvas work – diamonds, circles, triangles, etc. (And apparently if you go overseas they have a wider variety of fancy forms available — hemispheres, pre-made bags, and the like.) The first big project I have in mind, however, will require shapes that have a combination of long and arced sides to be whipstitched together. I needed some idea of how to go about it and what the final product would look like.

SDC10454SDC10455SDC10456

SDC10457SDC10458SDC10459

SDC10460

This is not particularly new or special. It was a good experience for me, but about the only thing I learned was not to be afraid of using the same hole on one piece of mesh for two different stitches on the other one. The side of the curved-over piece which isn’t whipstitched to another piece of mesh refuses to hold its curve perfectly, as I’m sure you can imagine. It’d be fine if I’d whipstitched it to another piece.

Joining the Edges of Two Sheets of Plastic Canvas in a 2D Manner

Sheets of plastic canvas only come so big. This could be a problem for a couple of projects I’d like to do. Whipstitching is what I did above to bind the two pieces of canvas together. My goal with this experiment was to see if I could whipstitch two pieces of canvas together, flat and seamless, to make a single-looking, larger piece.

This test came in two parts really, each with a subdivision of its own. Part one was about joining straight canvas edges together, and part two was about trying to join a stair-stepped edge together.

In part 1A, I worked with binding the straight edges of two different pieces of canvas together. The pink one was a 2×35 strip I had laying around from my earliest foray into plastic canvas. I tried looping it around to join the end, but (partly due to the stress of the mesh, which was a particularly stiff variety, trying to stay straight) it put too much strain on the yarn I was binding it with. It would only hold its seamless look while I held it with both hands — I couldn’t even get it to stay in place long enough to photograph it.

SDC10461SDC10462

Part 1B was an attempt to join two blue rectangles along straight edges. This went reasonably well, until I got to finishing the edge with the overcast stitch. Where the two pieces of canvas came together, the yarn wanted to slip between them instead of staying over them. I was able to avoid that some by going over the spot multiple times.

The real problem with this was that I had trouble keeping one of the two rectangles from moving upwards, shifting out of place. I was able to fix that by inserting my needle under a row of stitches across the backs of both pieces. I couldn’t leave the needle there indefinitely, of course; I’d have to find some kind of pin to leave there permanently for this solution to really work. On the plus side, that would help keep the pieces from folding and/or flopping around — the overall stability is increased.

SDC10463SDC10464SDC10465

In part two, I looked at joining two pieces along a stair-stepped edge, to try to take care of the stability problems without having to resort to permanent pins inserted in the back. Part 2A was a major flop simply because the stitches ran with the edge instead of against it. There was no way to join the pieces seamlessly because there was no place to put more stitches going in the same direction.

SDC10470

Part 2B, however, went quite well. As I’d hoped, the finished product was much more stable. I made my job easier to start with by shoving a couple of needles through the back to stabilize it while I worked, and when I took them out at the end had no stability problems. The seam isn’t as sturdy as a solid sheet of mesh, of course, but it’s not unsturdy like the joined straight edges above.

The third picture does a great job of showing the flaws here, though. Under the right (wrong?) lighting conditions, a slight height difference is noticeable, making the seam apparent. It also suffers the same sort of overcast stitching problems the straight-edge join had.

SDC10473SDC10474SDC10476

Things to Try Next

  1. Again trying to join two stair-stepped pieces together with the stitches running along the edge. Inability to do that is a serious flaw. If I leave more of the canvas unstitched, I could conceivably overlap the stair-stepped edges more. If it works as I anticipate, it would leave a definite ridge, so it would have to be used judiciously and incorporated into the decoration by design.
  2. Making a two-dimensional object stick straight up from another piece of mesh. I’d have to find a way to prop it up somehow — there would be a definite right and wrong side to it, too. Probably only good for decorative sculpting. Necessary for a project I have in mind.
  3. Using a piece of mesh on top of a piece of mesh to force a more three-dimensional look under certain lines. This idea is inspired by puff machine embroidery.

Getting Into Plastic Canvas, Part 1

June 13, 2009 4 comments

I’ve been interested in plastic canvas needlework for some years now. I never got into it because I never had sufficient motivation for doing so. Now I find myself with a fantastic idea for a halloween costume, with plastic canvas contruction being the most accessible and cheapest option for creating a necessary prop for my costume.

What is this plastic canvas thing you speak of?

For those who don’t know, plastic canvas needlepoint is almost exactly like doing needlepoint embroidery on fabric. The only real difference is that instead of doing your embroidery on cloth in thread or fine yarn, you do it on a plastic mesh in the kind of yarn you’d crochet or knit with. The best part about plastic canvas is that you can make three-dimensional objects with it. If you’ve seen any kind of finished plastic canvas work, it was probably a tissue box cover.

One doesn’t have to use yarn, either — any ribbon or cord that will go through the holes in the mesh will work. Using things besides yarn, in fact, seems to be the new trend in plastic canvas artistry (as does making anything but tissue box covers). The best examples I’ve seen were found by the folks over at CraftyPod. They’ve encountered some Japanese plastic canvas books with nifty ideas in them. They also came across someone who makes the darndest decorative pieces.

The possibilities for plastic canvas may be limited, but there are far more possibilities than there are restrictions. And if you take advantage of Google’s image search, you’ll find some really cool things people have made with it. Here are a few of my personal favorites: